PTFE Fiberglass Fabric|PTFE Tape|PTFE Belt|Silicone Fiberglass Fabric-HUAYU
E-mailsales@taixinghuayu.com      Hot Line 86-523-87851862
PTFE tape is replacing the PTFE spray in the certain fields

PTFE tape is replacing the PTFE spray in the certain fields

PTFE glass cloth tape in PTFE tape is mainly used to replace part of the spraying process. It is easy to operate and simple to install. It only needs to tear the yellow release paper on the back side and directly stick it to the object. The surface is ok, without any damage to the machine and extending the life of the machine.

Release paper and tear open picture as shown:

 
Production process: high-quality glass fiber cloth impregnated with PTFE  emulsion, one side after special treatment, the other side maintains its smooth surface.

Use process: tear off the yellow release paper - the surface with the glue is attached to the surface of the roller, rubber roller, etc. - tear off the tape directly when replacing

Note: Before cleaning, check the surface to be treated to ensure that the surface is clean, smooth, flat and dry.

The surface of the tape and the roller is freely separated. As long as the gluing process is standard, the adhesive will not peel off, no residual objects will adhere to the surface, and the replacement is convenient. The tape is small in size and light in weight, and can be transported by ordinary express. The cost per replacement is low.

The amount of PTFE emulsion is the main cost. PTFE glass cloth tape is impregnated with a layer of glass fiber cloth. The impregnation is generally not more than 3 times, so the unit cost is very low.

       

The main costs of PTFE spraying include PTFE emulsion cost, spray processing cost, transportation cost and maintenance cost. The operation process is cumbersome and the process is complicated. Each spraying cost is high, the machine life is shortened, and the tangible loss is large.

The spray emulsion is integrated with the surface, slightly scratched, and re-sprayed. The cost of the above is re-running back and forth, and even the last machine is directly damaged by multiple sprays. PTFE emulsions are used in large quantities and the unit cost is quite high.

Therefore, in many cases, PTFE tape is gradually replacing the traditional spraying process by virtue of these advantages.

上一篇:暂无

Recommended products

友情链接: Jiangsu Yiyu Composi   

在线客服 :

服务热线:86-523-87851862

电子邮箱: sales@taixinghuayu.com

公司地址:NO.68,Jiangping Middle Road of Taixing City, Jiangsu Province, China

Copyright © 2018 泰兴市华宇复合材料有限公司 版权所有
备案号: