PTFE Fiberglass Fabric|PTFE Tape|PTFE Belt|Silicone Fiberglass Fabric-HUAYU
公司邮箱      客服热线
PTFE Coated Kevlar Mesh Conveyor Belt

PTFE Coated Kevlar Mesh Conveyor Belt

PTFE Coated Kevlar Mesh Conveyor Belt is produced by super-wide dipping machine. It is made from high performance Kevlar fabric as the base cloth and then fully be dipped by the good-qualified PTFE resin. The thickness includes 1.0mm and 1.2mm. It is yellow and 4*4mm in mesh size. Its maximum width is 4 meters. According with the difference of the base cloth, it can be sorted into two kinds: one is called Half Kevlar mesh belt and the other one called Pure Kevlar mesh belt.
 
PTFE Coated Kevlar Mesh Conveyor Belt not only possesses the characteristics of high temperature resistance, non-adhesive and good permeability, but also has a longer lifetime as the Kevlar tread enhances the belt a lot.

PTFE Coated Kevlar Mesh Conveyor Belt(图1)      PTFE Coated Kevlar Mesh Conveyor Belt(图2)
 
Specification:
Item No Mesh Size Material
 
Thickness Gram Weight Temp Resistance Max
Width
Tensile Strength
HY-M007 4x4mm Kevlar + Fiberglas 1.2mm 600g/m² -70 至360℃ 4000mm 895/370N/cm
HY-M010 4x4mm Kevlar 1.0mm 500g/m² -70 至360℃ 4000mm 900/600N/cm
 
The overlapping method consists of the way to be overlapped by the black film, red film, white film and PTFE fiberlgass fabric. And the joint method mainly includes Kevlar bull-nose joint, wall joint and steel buckle joint.

Recommended products

友情链接: 亿商网   

在线客服 :

服务热线:86-523-87851862

电子邮箱: sales@taixinghuayu.com

公司地址:NO.68,Jiangping Middle Road of Taixing City, Jiangsu Province, China

Copyright © 2018 泰兴市华宇复合材料有限公司 版权所有
备案号: